Shower Mixer:

Finish: Black

Faceplate: 95mm(w) x 175mm(h) x 4mm thick

Backset: (Mounting board to front of lining)

Minimum: 50mm

Maximum: 75mm

Installation Hole Diameter:

Minimum: 46mm Ø

Maximum: 80mm Ø

Inlets:1/2” BSP male

Outlet:Upper: 1/2” BSP male

Cartridge: Mondo 40K Flat base

Suitable for low/unequal & mains pressure systems

Recommended Operational Pressure Range: 35 - 600 kPa

Maximum Operating Temp: 80°C Never to Exceed: 1000 kPa

Assembled and individually pressure-tested in New Zealand
Suitable all pressures above 35 kPa

In stock but may need some assembly.

Cartridge/Mechanism: SP CART40 KH

Here's a simple tip of how to set the mixer for better control over the mixing temperature on unequal pressure: With the faceplate off, set the handle to 6 o'clock. Turn both isolators off. Turn the hot isolator on full, then gradually open up the cold isolator until the water runs luke warm. That's all there is to it!

Decorative finishes are generally not as tough as finishes like chrome. To keep the finish looking good for longer, avoid spray cleaners, clean regularly with mild detergent on a soft cloth, rinse and wipe dry.

Bath Spout:

Specification:

Material: Solid Brass Matte Black plated

Suitable for Bath shower mixer taps or basin mixer taps

1/2'' female end

Easy to install, Wall Mounted water outlet

180 degree swivel to meet your demand of any positions and to save the space of your bathroom

Fit for NZ Standard

WELS Registration Number: T35406

WELS Star Rating: 5 Star, 5.5L/Min

Package Contents:

1* All Pressure Shower Mixer

2* Swivel Bath Spout

All/Low Pressure [1]

Filters

Aquatica All Pressures Mia2 40mm Shower Mixer With Square Swivel Bath Spout Matte Black Set

Join 5,000+ NZ HomeownersGet Exclusive Discounts & Early Access to Sales

Your Cart

Your cart is empty

Join 5,000+ NZ Homeowners
Get Exclusive Discounts & Early Access to Sales